Fuse - Honda HS1336iAS Owner's Manual

SERVICING YOUR SNOW BLOWER

FUSE

In the event of fuse failure, locate the cause of failure and repair it before you
continue operation. If the fuse continues to fail, discontinue snow blower use and
consult an authorized Honda snow blower dealer.
Never use a fuse with a different rating from that specified. Serious damage to the
electrical system or fire may result.
Block fuse replacement requires specific tools. Consult an authorized Honda
snow blower dealer for replacement.
Fuse replacement (blade fuse only)
1. Remove the rear cover (see page 96).
2. Open the fuse box cover.
3. Replace the fuse as shown.
Specified fuse: 5 A, 15 A, 30 A
4. Close the fuse box cover.
5. Reinstall the rear cover (see page 98).
(Blade fuses)
FUSE BOX COVER
PULL
BLOWN BLADE FUSE
The 5 A and 15 A spare fuses
are stored in the tool bag.
100
30 A (BATTERY)
30 A (SPARE FUSE)
BLOCK FUSE BOXES
(Consult with your authorized
Honda snow blower dealer for
replacement of these fuses.)
FUSE BOXES
5 A (ECU)
15 A (MAIN)
PUSH
FUSE BOX COVER
15 A (SPARE FUSE)
5 A (SPARE FUSE)
5 A (AUGER CLUTCH)
5 A (HEADLIGHT)
5 A (INDICATORS)