Honda HS1336iAS Owner's Manual page 61

MAIN SHIFT LEVER
THROTTLE CONTROL LEVER
Throttle control lever
Fast range
Slow range
*For the amount of removed snow, 2nd is the largest.
DRIVE
CLUTCH
LEVER
AUGER CLUTCH SWITCH
6) Move the main shift lever fully to the
FAST
RANGE
SLOW
RANGE
7) After stabilizing the operating speed,
Engine speed
4th Fast
3rd
2nd
1st Slow
8) When the drive clutch lever is released,
end of the forward slow speed range
slowly and clear the snow.
• When the auger hits against the road
or inclines to a side, adjust the auger
housing position by operating the
auger housing control switch.
• When the snow is small in volume or
light in nature, move the main shift
lever to the high speed side. Perform
minor adjustment of the main shift
lever to stabilize the operating speed if
necessary.
adjust the snow discharge distance by
operating the throttle control lever as
needed.
• Traveling speed will decrease by
increasing the snow discharge
distance, while the speed will increase
by decreasing the snow discharge
distance. Adjust the snow discharge
distance by operating the throttle
control lever as needed.
Snow discharge
distance
Long
Short
the auger clutch switch indicator (green)
goes off, both the auger and blower stop
turning, and the snow blower stops
moving.
Turn the auger clutch switch OFF if you
move the snow blower without
performing the snow blowing
operation.
OPERATION
Snow amount*
Small
Large
Small
59