Honda HS1336iAS Owner's Manual page 22

CONTROLS & FEATURES
Characteristics of POWER mode:
• Travel speed is automatically adjusted according to the workload so engine
power can be maintained at or near the maximum level.
• Engine speed is automatically adjusted according to operating conditions so
the snow discharge distance remains constant that have been set with the
throttle control lever.
• The auger is automatically raised when the snow blower is reversing.
USA model only:
In case the auger clutch switch is in the ON position, the auger is
automatically returned to the original position when the snow blower begins
moving forward again.
Characteristics of MANUAL mode:
• No automatic adjustment is made. Manually adjust the engine speed and
travel speed according to the workload.
Do not turn the mode selector switch to another position while the snow blower is
moving. The electronic control unit will interpret this as a failure; the snow blower
will stop moving and the auger will stop turning.
When the snow blower and auger stop moving/turning, move the main shift lever to
the N (neutral) position, release the drive clutch lever.
Check each part to verify it is in its proper position before resuming operation.
20