TAKING CARE OF UNEXPECTED PROBLEMS
EMERGENCY TRANSPORT
You can move the snow blower by pushing or pulling it without engine power.
Place the snow blower on level ground after transportation and use a new cotter
pin when reinstalling the wheel pin.
1. Remove the cotter pins from the rear right and left wheels.
2. Remove the wheel pins from the rear right and left wheels.
3. The track rotates freely, allowing the operator to move the snow blower
without engine power.
130
Before removing the wheel pins, make sure
to stop the rotating parts, stop the engine
and remove the engine switch key.
Do not remove the wheel pins on the
slope. The snow blower may move
unintentionally, causing injury.
WHEEL PIN
COTTER PIN