STORAGE
Engine Oil
Change the engine oil (see page 84).
Engine Cylinder
1. Remove the spark plug (see page 87).
3
2. Pour 1—2 teaspoons (5—10 cm
) of clean engine oil into the cylinder.
3. Rotate the engine a few revolutions to distribute the oil in the cylinder.
4. Reinstall the spark plug.
Battery
If the snow blower will be stored for an extended period, disconnect the negative
terminal from battery A. Remove the batteries and recharge them every 6 months
and every year before operation and storage, or if the battery voltage ever drops
below 12.9V.
Check both batteries' electrolyte level (see page 94, 95).
Charge the batteries (see page 99).
110