Table of Contents
Advertisement
C.2
Notice
1.
When there are 4 set of devices being coordinated at the same time, the level
Index light will be lit by turns.
2.
Devices in initial mode will in high power consumption status, beware of your
power status when using batteries.
3.
When using the ADAM utility the initial value of an ADAM-2051Z is 1. The
ADAM-2051Z also supports dry contacts.
4.
If customers want to connect an ADAM-2000 model with SCADA software, they
can use ADAM-utility to get ADAM-2000 system parameters then SCADA soft-
ware can connect them according these parameters.
Note!
ADAM-2000 models do not currently support Mod-scan. We will support
this feature in the future.
ADAM-2000 models do not currently support OPC sever., We will sup-
port this feature in the future.
5.
ADAM-2000 models do not support the "My Favorite" function in the ADAM util-
ity.
6.
When two set of devices are to be coordinated at the same time, the second set
router and end-device connect to first set of devices.
7.
When there are 2 sets of devices to coordinate with at the same time, they need
to reset power to re-initial PAN ID if they want to connect to another set.
63
ADAM-2000 Series User Manual
Advertisement
Table of Contents
