Listening To A Vinyl Record; Listening To A Cd/Cd-Mp3 - Victrola VTA-600B Manual

1. Press the "PHONO" selector button.
2. Gently open the top cover.
Note: Be carefully not to pinch your finger when
opening/closing the top cover.
3. Place a vinyl record on the turntable. When playing
a 45 RPM record, use the included adaptor.
4. Select the appropriate speed (4).
5. Gently push tone arm clip (5) to the right to release the tone arm.
6. Raise the cue lever (6) to lift the tone arm off the tone arm support.
7. Move the tone arm gently to the edge of the record (or the starting point of a track).
The turntable will begin to turn.
8. Gently lower the tone arm by slowly releasing the cue lever.
9. When the record reaches to its end, tone arm and rotation stop. Lift the tone arm and place
it to tone arm rest manually.
Important:
- Closing the top cover will help prevent dust from settling on the turntable.
- Always relock the tone arm clip before transporting the unit.
- Do not place anything on top of the turntable cover, especially while playing a record.
1. Press the "CD/USB" button once to select CD mode. The unit will display the "CD".
Note: When no disc is set, "no disc" will appear on the display.
2. Press the EJECT button
Note: This button will only work in CD mode
3. Place a disc on the tray with the printed label face up.
4. Press the EJECT button to close the tray.
5. "READ" will appear for a few seconds and then the number of tracks will show on the display.
6. After that it will begin playback from the first track automatically.
7. To temporarily pause playback, press the PLAY/PAUSE button (
8. To skip tracks backward or forward, press the corresponding skip button (
9. To fast rewind / forward within a track, press and hold down the corresponding skip button
( or
10. To stop playback, press the STOP (
NOTE: While listening to an CD-MP3, press the Folder down or Folder up button to choose your
desired folder.

Listening to a Vinyl Record

Listening to a CD/CD-MP3

to open the tray.
) until the desired position is reached.
) button
10
). Press again to resume.
or ).