Table of Contents
Advertisement
Listening to an External Audio Device (AUX Mode)
Press the button POWER/FUNC. to select AUX IN function. AUX IN indicator will light up.
In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player,
Portable CD Player, etc.)
There is a AUX-IN jack on the front side of the unit. When connecting a device that has a headphone
jack, use the cable with 3.5mm plugs on either end with the front AUX-IN jack.
1.
Plug one end of the AUX-IN cable (not included) into the AUX-IN jack.
2.
Plug the other end of the cable into the headphone jack of the external audio source.
NOTE: All operations are only available on your external device.
1.
Press the button POWER/FUNC. to select PHONO function. PHONO indicator will light up.
2.
Gently open the top cover.
Note: Be careful not to pinch your finger when opening/closing the top cover.
3.
Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor.
4.
Select the appropriate speed (4).
5.
Remove the tone arm-rest holder to release the tone arm.
6.
Move the tone arm gently to the edge of the record (or the starting point of a track).
The turntable will begin to turn.
7.
When the record reaches the end, the tone arm will stop at the center of the record. Lift and return
the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect the tone arm.
Important:
- Closing the top cover will help prevent dust from settling on the turntable.
- Always relock the tone arm clip before transporting the unit.
- Do not place anything on top of the turntable cover, especially while playing a record.
- Do not close the turntable cover while a record is in the unit.
Listening to a Vinyl Record
8
Advertisement
Table of Contents
