Product Overview - Victrola VTA-600B Manual

Front View
1. "PAIR" Press shortly to disconnect the current connection. Press 2 seconds to reconnect the
device that has been connected before.
2. "REPEAT" In CD/CD-MP3 or USB mode, press to select a repeat mode.
3. "PROGRAM" In CD/CD-MP3 or USB mode, while the CD/CD-MP3 or USB is stopped, press to
program tracks.
4. "SHUFFLE" In CD/CD-MP3 or USB mode, press for shuffle playback.
5. "INTRO" In CD/CD-MP3 or USB mode, press to play every track about 10 seconds. "INTRO"
will be shown on the display if it skips to the next track.
6. "VOLUME" KNOB Turn to adjust volume. (Note: volume ranges from 00 to 30.)
7. "POWER" Press to turn the unit on or off.
8. "3.5mm HEADPHONE JACK" Accepts headphone/earphone plugs.
9. "FM Scale"
10. "DISPLAY"
11. "AUX/BLUETOOTH" Press to switch to AUX mode or Bluetooth mode.
12. "PHONO" Press to enter to the PHONO mode.
13. "CD/USB" Press to switch to CD mode or USB mode.
14. "TAPE" Press to enter to the cassette mode.
15. "FM" Press to enter to the FM mode.
16. RADIO TUNER KNOB In FM mode, turn to tune in a station.
17. "EJECT" In CD mode, use to open and close the disc tray.
18. "USB JACK"
19. "AUX-IN JACK" Connect an external source to the AUX IN socket.
20&21. "Folder up & Folder down" In USB/CD-MP3 mode, press to choose your desired folder.
22. PLAY/PAUSE (
23&24. PREVIOUS / NEXT TRACK & REWIND / FF
In CD/CD-MP3 or USB Mode, press once to skip to the previous / next track. Press and hold
to fast rewind / forward.
25. STOP ( ) Press to stop playback.
26. "DISC TRAY"
A: REMOTE SENSOR
B: TUNED/ST INDICATOR In FM Mode, the "TUNED/ST" indicator lights up red when tuning
in the stereo reception station.

Product Overview

) Press to start playback, press again to pause.
5