Do you have a question about the VTA-600B and is the answer not in the manual?
Questions and answers
Elliot Wam
February 8, 2025
Remote is not working even though batteries are good
1 comments:
Mr. Anderson
February 11, 2025
The remote for the Victrola VTA-600B may not be working despite having good batteries due to several possible reasons: 1. Obstructions – There may be obstacles between the remote and the unit's sensor. 2. Interference – Other infrared devices nearby may cause interference. 3. Incorrect Battery Installation – The batteries might not be inserted with the correct polarity. 4. Defective Remote – Some users have reported receiving a faulty remote that needed replacement.
If the issue persists, contacting the manufacturer for a replacement remote may be necessary.
This answer is automatically generated
Lise Ménard
January 27, 2025
AU BOUT DE LA GRILLE J'AI CD ET COMPLETEMENT A DROITE J'AI UN E MARQUE QUI SCINTILLE TOUJOURS
1 comments:
Mr. Anderson
May 14, 2025
The flashing mark on the right side of the Victrola VTA-600B indicates that the unit is processing information.
Important Safety Instructions ..................3 Product Overview ...................... 5 Setup / Basic Operation ..................... 8 Remote Control......................8 Listening to a Vinyl Record..................10 Listening to a CD/CD-MP3 ..................10 Listening to the Radio....................12 Listening to an External Audio Device (AUX Mode) ..........12 Listening to an External Audio Device (BT Mode) ..........
CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. WARNING: Invisible laser radiation when open and interlock failed or defeated.
Page 4
-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. -Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside.
Product Overview Front View “PAIR” Press shortly to disconnect the current connection. Press 2 seconds to reconnect the device that has been connected before. “REPEAT” In CD/CD-MP3 or USB mode, press to select a repeat mode. “PROGRAM” In CD/CD-MP3 or USB mode, while the CD/CD-MP3 or USB is stopped, press to program tracks.
Page 6
Right Side View CASSETTE FF & EJECT Press halfway to fast forward, press all the way to end and eject the tape. Rear View FM wire antenna While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception. USB JACK (Recording Only) LINE OUT jacks For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA...
Page 7
Parts of the Turntable Turntable. Safety Screw (for transport) Before using the unit, turn the screw clockwise using a coin or screwdriver. Important: When you transport the unit, turn the screw counterclockwise to secure the turntable. Speed Selector. Tone Arm holder. Before use, completely loosen the twist tie on the tone arm and uplift Tone Arm.
Setup / Basic Operation Setup Remove white protective needle cover by gently pulling towards front of unit. Remove any packaging materials from the unit. Connect the AC power cord to a wall outlet. Note: To prevent interference, avoid bundling audio signal cables together with the AC power cord. Basic Operation Press the POWER button to turn the unit on.
Page 9
Battery Installation Remove the battery compartment cover. Insert 2x “AAA” batteries. (batteries not included) Note: Make sure that they are oriented so their polarity markings, “+” and “-” match the remote’s markings. Replace the battery compartment cover. Battery Replacement When the distance required between the remote control unit and main unit decreases, it is necessary to replace the battery with new ones.
Listening to a Vinyl Record Press the “PHONO” selector button. Gently open the top cover. Note: Be carefully not to pinch your finger when opening/closing the top cover. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor. Select the appropriate speed (4).
Page 11
Important: Never place more than one disc on the tray. The disc must be placed in the center of the disc tray. An incorrectly loaded disc can permanently damage the tray door mechanism. Do not push the CD tray – always use the OPEN/CLOSE button. It takes a moment for the unit to load a disc, during which all buttons will be temporarily deactivated.
Press “CD/USB” button once to select CD mode, then load a CD. While the CD is stopped, press the PROGRAM button. “PROGRAM” indicator blinks, and “P-01” appears on the display. Press ( ) to select a track number. Press the PROGRAM button again to set the current track. “P-02”...
Listening to an External Audio Device (BT Mode) In BT (Bluetooth) mode, this unit can enjoy music from external devices which have a built ‐ in Bluetooth feature. GETTING CONNECTED USING BLUETOOTH Press “AUX/Bluetooth” button twice to select Bluetooth mode and then the display will show “...
USB Memory Stick Playback Press CD/USB button repeatedly to switch to USB mode. “USB” will appear on the right corner. Note: When no USB is set, “NO USB” will appear on the display. Connect a USB memory stick (not included) into the USB slot and then the number of tracks will show on the display.
Programmed Playback Up to 99 tracks can be programmed to play in the desired order. Notes: Shuffle playback does not work during programmed playback. Press “CD/USB” to enter USB mode, then insert a USB memory stick into USB slot. While the USB is stopped, press the PROGRAM button. “PROGRAM”...
Maintenance / Proper Handling Compact Disc Handling Always place the disc on the disc tray with the label side facing upward (compact discs can be played/recorded • only on one side) To remove a disc from its storage case, press down on the center of the case and lift the disc upward, holding •...
Specifications GENERAL Power Requirements AC 100-240V~50/60 Hz Power Consumption Dimensions (W x H x D) 460mm x 243mm x 335mm (approx.) 18” x 9.6” x 13.2” (approx.) Weight 12 kg. (approx.) 26.5 lbs. (approx) AMPLIFIER Output Power 5 W + 5 W Frequency Response 60 to 20,000 Hz SPEAKER SYSTEM...
Troubleshooting Guide Symptom Possible Cause Solution Unit will not power Unit is unplugged. Connect the unit to • • • the AC power supply. No sound output The volume level is set too low. Adjust the volume. • • • from speakers.
Page 19
The USB drive has no MP3 file correctly. • For further assistance with your product, call Victrola at TOLL FREE# 1-877-ITECH-97 (1-877-483-2497). Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender.
Page 22
There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW.
Need help?
Do you have a question about the VTA-600B and is the answer not in the manual?
Questions and answers
Remote is not working even though batteries are good
The remote for the Victrola VTA-600B may not be working despite having good batteries due to several possible reasons:
1. Obstructions – There may be obstacles between the remote and the unit's sensor.
2. Interference – Other infrared devices nearby may cause interference.
3. Incorrect Battery Installation – The batteries might not be inserted with the correct polarity.
4. Defective Remote – Some users have reported receiving a faulty remote that needed replacement.
If the issue persists, contacting the manufacturer for a replacement remote may be necessary.
This answer is automatically generated
AU BOUT DE LA GRILLE J'AI CD ET COMPLETEMENT A DROITE J'AI UN E MARQUE QUI SCINTILLE TOUJOURS
The flashing mark on the right side of the Victrola VTA-600B indicates that the unit is processing information.
This answer is automatically generated