Usb Recording Operation - Victrola VTA-600B Manual

Programmed Playback
Up to 99 tracks can be programmed to play in the desired order.
Notes:
- Shuffle playback does not work during programmed playback.
1. Press "CD/USB" to enter USB mode, then insert a USB memory
stick into USB slot.
2. While the USB is stopped, press the PROGRAM button.
3. "PROGRAM" indicator blinks, and "P-01" appears on the display.
4. Press ( or
5. Press the PROGRAM button again to set the current track.
6. "P-02" is displayed. Repeat steps 4 thru 5 to program the additional tracks.
7. When the selection of track numbers has been finished, press the PLAY button (
program playback.
8. To cancel the program mode, press the STOP (
disappear from the display.
To check the programmed order
In the stop mode, press (
been programmed.
To properly record your vinyl to MP3 via computer, use the included USB Output Cable and
Instructional CD Software. Connect one end of the USB cable to the turntable (USB jack on the back
of the unit) and the other end into your computer. Then connect the AC power cord to the turntable.
To install and use the software on your computer, select the proper Mac or PC install files, then follow
the prompts provided on the Instructional CD. For the most up to date manuals, software, instructional
details, troubleshooting or other downloadable content, please go to
) to select a track number.
or ) repeatedly to show the track numbers that have

USB Recording Operation

) button twice and then "PROGRAM" icon
http://audacityteam.org
15
) to start