Listening To The Fm Radio; Listening To An External Audio Device (Bt Mode); Listening To An External Audio Device (Aux Mode); Listening To A Vinyl Record - Victrola HIGHLAND Manual

1. Rotate function knob to select "FM" function.
2 Tune to the desired station by using the Radio Tuner Knob.

Listening to an External Audio Device (BT Mode)

In BT (Bluetooth) mode, this unit can play music from an external device with the Bluetooth feature.
GETTING CONNECTED USING BLUETOOTH
1. Rotate to select "BT" function.
2. The Bluetooth indicator will flash.
3. Turn on the Bluetooth function on your external device.
NOTE: The effective distance between your external device and this apparatus is 10 meters.
4. When "VTA-330B" appears on the devices list on your external device's Bluetooth Settings Menu,
press "VTA-330B" to connect. (If a password is required, enter "0000" then press "OK" on your
external device).
5. When your Bluetooth connection is successful, Bluetooth LED indicator will remain lit.

Listening to an External Audio Device (AUX Mode)

In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player,
Portable CD Player, etc.). There is an AUX-IN jack on the front side of the unit. When connecting a
device that has a headphone jack, use the cable with 3.5mm plugs on either end with the front/top
AUX-IN jack.
1. Rotate Function Knob to select the "AUX" function.
2. Plug one end of the AUX-IN cable (not included) into the AUX-IN jack.
3. Plug the other end of the cable into the headphone jack of the external audio source.
NOTE: All operations are only available on your external device.
1. Rotate the Function Knob to select the "PHONO" function.
2. Gently open the top cover.
Note: Be careful not to pinch your finger when opening/closing the top cover.
3. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor.
4. Select the appropriate speed (4).
5. Remove the tone arm holder to release the tone arm.
6. Move the tone arm gently to the edge of the record (or the starting point of a track).
The turntable will begin to turn.
7. When the record reaches the end, the tone arm will stop at the center of the record. Lift and return
the tone arm to the tone arm rest manually. Lock the tone arm holder to protect the tone arm.
Important:
- Closing the top cover will help prevent dust from settling on the turntable.
- Always relock the tone arm clip before transporting the unit.
- Do not place anything on top of the turntable cover, especially while playing a record.

Listening to the FM Radio

Listening to a Vinyl Record

8