CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. Important Safety Instructions Read these instructions –...
Page 4
-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. -Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside.
Product Overview Front View 3.5mm AUX-IN JACK: Connect your external source to the AUX-IN jack. VOL-: When unit is ON, press or press and hold to decrease the volume. VOL+: When unit is ON, press or press and hold to increase the volume. AUX INDICATOR: In AUX IN mode, it will light up.
Page 6
Parts of the Turntable Turntable Speed Selector Tone Arm holder Before use, completely loosen the twist tie on the tone arm to lift tone arm. Tone Arm - Stylus 45 RPM adaptor Cue-lever - Use this lever to lift the tone arm.
Setup / Basic Operation Setup 1. Remove white protective needle cover by gently pulling towards front of unit. 2. Remove any packaging materials from the unit. 3. Connect the AC power cord to a wall outlet. Note: It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label.
Listening to an External Audio Device (AUX Mode) Press the button POWER/FUNC. to select AUX IN function. AUX IN indicator will light up. In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player, Portable CD Player, etc.) There is a AUX-IN jack on the front side of the unit.
Maintenance / Proper Handling Handling Vinyl Records Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. • Touching the record surface will cause your record’s quality to deteriorate. To clean a record, use a soft anti-static cloth to gently wipe the record surface. •...
Specifications GENERAL Power Requirements AC 100-240 V~50/60 Hz Power Consumption 10 W Dimensions (W x D x H) 13.8 in x 13 in x 5.9 in (approx.) 351 x 330 x 150mm (approx.) Weight 8.8 lbs (approx.) . (approx.) AMPLIFIER Output Power 3 W + 3 W Frequency Response...
Troubleshooting Guide Symptom Possible Cause Solution Unit will not power on. Unit is unplugged. Connect the unit to the • • • AC power supply. No sound output from The volume level is set too low. Adjust the volume. • •...
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. For further assistance with your product, call Victrola at TOLL FREE# 1-877-ITECH-97 (1-877-483-2497). Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice.
Page 14
God or attempted repair by an unauthorized service agent. To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender.
Need help?
Do you have a question about the AVERY VTA-320B and is the answer not in the manual?
Questions and answers