Table of Contents
Advertisement
Turning off the power
1.
Press the S TA ND B Y / O N button on the projector or the remote control.
The message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the S TA ND B Y / O N button again while the message appears.
The projector lamp will go off, and the PO W E R indicator will begin blinking
in orange. Then the PO W E R indicator will stop blinking and light in steady
orange when the lamp cooling is completed (96).
3.
Attach the lens cover, after the PO W E R indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings since the projection ray may cause a trouble on
your eyes.
►Keep any object away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in fire or smoke.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
NOTE
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn
on/off. Please refer to the DIRECT POWER ON (60), AUTO POWER ON
(60) and AUTO POWER OFF (60) items of the OPTION menu.
►A strong light is emitted when the projector's power is on.
Power on/off
2 1
Advertisement
Table of Contents
