Table of Contents
Advertisement
SECURITY menu
It e m
M Y TE X T
D IS PL A Y
M Y TE X T
W R ITING
7 8
(1) Use the ▲/▼ buttons on the SECURITY menu to
select the MY TEXT DISPLAY and press the ► or
E NTE R button to display the MY TEXT DISPLAY
on/off menu.
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY
on/off menu to select on or off.
ON ó OFF
When it is set ON, the MY TEXT will be displayed
on the START UP screen and the INPUT_
INFORMATION when the INFORMATION on the
SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
(1) Use the ▲/▼ buttons on the
SECURITY menu to select the MY
TEXT WRITING and press the ►
button. The MY TEXT WRITING dialog
will be displayed.
(2) The current MY TEXT will be displayed
on the first 3 lines. If not yet written, the
lines will be blank.
Use the ▲/▼/◄/► buttons and the
E NTE R or
button to select and enter
characters. To erase 1 character at one
time, press the R E S E T button or press
the ◄ and
button at the same time.
Also if you move the cursor to DELETE
or CLEAR ALL on screen and press the
E NTE R or
button, 1 character or
all characters will be erased. The MY
TEXT can be input up to 26 characters
on each line.
(3) To change an already inserted
character, press the ▲/▼ button to
move the cursor to one of the first 3
lines, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the E NTE R or
follow the same procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and press
the ►, E NTE R or
saving changes, move the cursor to the CANCEL on screen and press
the ◄, E NTE R or
•
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
D e s c r i p t i o n
button, the character is selected. Then,
button. To revert to the previous MY TEXT without
button.
Advertisement
Table of Contents
