Part Names - Dukane ImagePro 8950WU User Manual

Introduction

Part names

Projector
(1) Lamp cover (98)
The lamp unit is inside.
(2) Speaker (22, 55)
(3) Filter cover (100)
The air filter and intake vent are inside.
(4) Elevator feet (x2) (25)
(5) Elevator button (25)
(6) Remote sensor (18)
(7) Lens (103)
(8) Lens cover
(9) Intake vents
(10) Control panel (5)
(11) F O C US ring (25)
(12) Z O O M ring (25)
(13) A C (AC inlet) (15)
(14) Exhaust vent
(15) Ports (5)
WARNING
manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this product.
►Do not look into the lens and the openings on the projector while the lamp is
on, since the projection ray may cause a trouble on your eyes.
►Keep any object away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in fire or smoke.
CAUTION
vents during use or just after use, since it is too hot.
►Do not attach anything onto the lens because it could damage the lens,
such as melting the lens.
►Do not attach anything onto the lens except the lens cover of this projector
because it could damage the lens, such as melting the lens.
(continued on next page)
4
►Do not open or remove any portion of the product, unless the
►Do not touch around the lamp cover and the exhaust
(11)
(8)
(4)
(6) (7)
(5)
(10)
(15)
(9)
(13)
(12)
(2)
(3)
(4)
(5)
(1)
(14)
(9)