Table of Contents
Advertisement
It e m
D IG ITA L R A NG E
C O M PUTE R IN
F R A M E L O C K
(continued on next page)
The digital range of HDMI
H D M I 2 /M H L ports can be set.
(1) Use the ▲/▼ buttons to select the port to be set.
(2) Use the ◄/►buttons to select the digital range.
AUTO ó NORMAL ó ENHANCED
AUTO: automatically sets the optimum mode.
NORMAL: sets the suitable mode for DVD signals. (16-235)
ENHANCED: sets the suitable mode for computer signals. (0-255)
• If the contrast of the screen image is too strong or too weak, try
finding a more suitable mode.
The computer input signal type for C O M PUTE R IN1 and IN2 ports
can be set.
(1) Use the ▲/▼ buttons to select the C O M PUTE R IN port to be set.
(2) Use the ◄/► buttons to select
the computer input signal type.
(COMPUTER IN1)
AUTO ó SYNC ON G OFF
(COMPUTER IN2)
AUTO ó SYNC ON G OFF ó MONITOR OUT
• Selecting the AUTO mode allows
you to input a sync on G signal or component video signal from the
port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select the input ports.
(2) Use the ◄/► buttons to turn the frame lock function on/off .
ON ó OFF
• This item can be performed only on a signal with a vertical
frequency of 49 to 51Hz, 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
D e s c r i p t i o n
TM
/MHL input signals from the H D M I 1 and
INPUT menu
4 3
Advertisement
Table of Contents
