Table of Contents
Advertisement
It e m
S O UR C E NA M E
(c o n t i n u e d )
TE M PL A TE
(continued on next page)
(6) The current name will be displayed
on the first line. Use the ▲/▼/◄/►
buttons and the E NTE R or
select and enter characters. To erase 1
character at one time, press the R E S E T
button or press the ◄ and
at the same time. Also if you move the
cursor to DELETE or CLEAR ALL on
screen and press the E NTE R or
button, 1 character or all characters will
be erased. The name can be a maximum
of 16 characters.
(7) To change an already inserted character,
press the ▲ button to move the cursor to
the first line, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the E NTE R or
Then, follow the same procedure as described at the item (6)
above.
(8) To finish entering text, move the cursor to the OK on screen
and press the ►, E NTE R or
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄, E NTE R or
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the E NTE R ) button to display the selected
template, and press the ◄ cursor button to close the displayed
screen.
The last selected template is displayed when the M Y B UTTO N
allocated to the TEMPLATE function is pressed (57).
TEST PATTERN ó DOT-LINE1 ó DOT-LINE2
DOT-LINE4
D e s c r i p t i o n
button to
button
button, the character is selected.
button. To revert to the previous
DOT-LINE3
ó
SCREEN menu
button.
5 7
Advertisement
Table of Contents
