Wireless Setup - TRENDnet TVIP562 User Manual

TRENDnet User's Guide
In the Apple part, we can enable the Bonjour feature. Click the Apply button to apply
the modifications made.

Wireless Setup

In the Wireless Configuration section, we can configure the following.
Click the Enable Wireless button to enable the wireless feature for this camera. After
clicking the Enable Wireless button, the camera will restart (80 seconds) and the
following page will be available.
© Copyright 2013 TRENDnet. All Rights Reserved.
Untick the Wireless option to disable the wireless functionality of this camera. Enter the
wireless Network Name (SSID) in the space provide or select the wireless network name
from the Site Survey drop-down list. If the wireless network exists and is not displayed
in the Site Survey drop-down list, click the Rescan button to rescan for available
wireless networks.
Select the Wireless Mode for this camera. The two supported modes are Infrastructure
and Ad-Hoc. When connecting the camera to a wireless access point or router, use the
infrastructure mode. When connecting the camera to a wireless adapter directly, select
the ad-hoc mode. After selecting the ad-hoc mode, we will be able to manually select
the wireless Channel number used for the connection.
Select the Security Mode for this camera. The four supported security modes for this
camera are None, WEP, WPA-PSK, and WPA2-PSK. After selecting WPA-PSK or WPA2-
PSK as the security mode, select the Cipher Type used for this security mode. After
selecting WEP, WPA-PSK, or WPA2-PSK as the security mode, enter the wireless Key
used in the space provided.
Tick the Show Hidden Key option to display the key entered.
Click the Apply button to apply the modifications made.
TV-IP562WI
38