Wireless Setup; Dynamic Dns - TRENDnet TV-IP572W User Manual

TRENDnet User's Guide

Wireless Setup

This screen shows the Wireless Settings. Click the Wireless checkbox to enable wireless.
Complete the details in the fields according to your router. Enter a Network Name,
under Site Survey select the SSID from the drop-down list or rescan your network
settings. Select the Wireless Mode from the drop-down list (Infrastructure, Ad-Hoc
mode). Select your Security Mode from the drop-down list. Select from WEP/WPA-
PSK/WPA2-PSK. Finally enter the security key. Click Apply to accept the changes.
WEP – Wired Equivalent Privacy is a security protocol for wireless local area networks
defined in the 802.11b standard. WEP provides the same level of security as that of a
wired LAN.
WPA-PSK - is a more secured method of wireless encryption. With WPA-PSK you don't
provide your router with an encryption key but rather a paraphrase.
WPA2-PSK – highly secured method of wireless encryption.
© Copyright 2012 TRENDnet. All Rights Reserved.

Dynamic DNS

Also under Network Settings is Dynamic DNS. If you have not enabled this function in
the Setup Wizard click the DDNS checkbox to enable Dynamic DDNS. Select your DDNS
server from the drop-down list and fill in the parameters from these fields: Host Name,
User Name, Password, Confirm Password, and Timeout. Click Apply to set these
changes and continue.
TV-IP572W / TV-IP572WI
19