TRENDnet TVIP562 User Manual page 43

TRENDnet User's Guide
After selecting the Auto option as the Day/Night Mode, we can configure the following.
Select the Sensitivity Level option from the drop-down list. There are three main
sensitivity point called Brightest, Median, and Darkest. In between these main
sensitivity points are numerical sensitivity values ranging from +1 to +7 between
Median and Brightest, and numerical sensitivity values ranging from -1 to -5 between
Median and Darkest. Selecting the sensitivity level closer to the Brightest option, will
switch the IR LEDs on earlier when the area becomes darker. Selecting the sensitivity
level closer to the Darkest option, will switch the IR LEDs on later when the area
becomes darker.
After selecting the Schedule option as the Day/Night Mode, we can configure the
following.
Enter the Day Time values in the spaces provided. First enter the starting hour and
minute values next to the From option and then enter the ending hour and minute
values next to the to option.
© Copyright 2013 TRENDnet. All Rights Reserved.
In the Audio Setup section, we can configure the following.
Tick the Speaker option to enable the audio feed from the camera to the PC. Tick the
Microphone option to enable the audio feed from the PC to the camera. Select the
Volume level for both selections. Click the Apply button to apply the modifications
made.
TV-IP562WI
41