Table of Contents
Advertisement
TRENDnet User's Guide
Network
In the LAN Settings section, we can configure the following.
In the IPv4 Settings part, we can configure the IPv4 network settings used by this
camera. Select the DHCP Connection option to automatically obtain the IPv4 network
settings, for this camera, from a DHCP server, located on the local network.
Select the Static IP Address option to manually configure the IPv4 network settings used
by this camera. Enter the IPv4 Address, Subnet Mask, Default Gateway, Primary DNS,
Optional Secondary DNS, and Optional Search Domain parameters in the spaces
provided.
This camera can connect to the Internet directly through the means of a PPPoE
connection. Tick the PPPoE option to enable this feature. Enter the PPPoE Internet
connection's User Name and Password in the spaces provided. This information can be
acquired from your ISP.
© Copyright 2013 TRENDnet. All Rights Reserved.
In the IPv6 Settings part, we can configure the IPv6 network settings used by this
camera. Select the DHCP Connection option to automatically obtain the IPv6 network
settings, for this camera, from a DHCP server, located on the local network.
Select the Static IP Address option to manually configure the IPv6 network settings used
by this camera. Enter the IPv6 Address/Prefix Length, Default Gateway (Router),
Primary DNS, and Optional Secondary DNS parameters in the spaces provided.
In the Port Settings part, enter the HTTP Port and RSTP Port numbers used.
In the UPnP part, tick the UPnP option to enable the UPnP feature on this camera. Tick
the UPnP Port Forward option to enable the UPnP port forwarding feature. Enter the
External HTTP and External RSTP port number in the respective spaces provided.
TV-IP562WI
37
Advertisement
Table of Contents
