Table of Contents
Advertisement
TRENDnet User's Guide
Hardware Installation
Cabling
It's recommended that the wiring the cable in your home or office by a
professional. If you already have the cable deployed, make sure the cable and
the connectors meet the category 5 Ethernet cable standards. At least 2 pairs
of twisted lines are required for power and data. Poor cable quality may cause
unexpected problems. Testing your cable or running a new cable is suggested
for new camera installation.
Waterproof cap
The camera itself is IP66 grade water and dust proof. There is a set of network
cable water proof caps that comes with the package as well. Run your cable
going through the accessories, and then crimp the cable with an RJ45 module.
Plug in the network cable and then tighten the waterproof cap to prevent
water running into camera through the cable.
© Copyright 2019 TRENDnet. All Rights Reserved.
Setup Your Camera with Camera Utility
1. Please download the utility at
http://www.trendnet.com/camerautility
2. Extract the downloaded file and double click on the camera utility file
to install
3. Last, click Next to finish the installation.
TV‐IP345PI
7
Advertisement
Table of Contents
