Product Hardware Features - TRENDnet TVIP562 User Manual

TRENDnet User's Guide

Product Hardware Features

Front Panel View
1. Light Sensor – Detects the light source to turn IR on or off.
2. IR LED – Built-in IR LED for night vision use.
3. Camera Lens – Fixed lens. The camera adjusts automatically.
4. Microphone – Built-in microphone for audio can be turned on or off.
5. WPS Indicator – This LED indicator is solid blue when your camera is powered
on. If this LED indicator is off, there is no power to your camera. This LED
indicator is blinking green when there is connection/data to your camera.
6. WPS Button – Use this button to enable WPS.
7. Link – This LED indicator is solid blue when your camera is powered on. If this
LED indicator is off, there is no power to your camera. This LED indicator is
blinking green when there is connection/data to your camera.
8. Stand – Portable adjustable stand.
© Copyright 2013 TRENDnet. All Rights Reserved.
Rear Panel View
1. Power Port – Connect the included power adapter from your camera to an
available power outlet. Note: Use only the adapter that came with your
camera.
2. Line Out – Insert an external active speaker.
3. LAN Port – Connect Ethernet cables to your wired network devices.
4. Micro SD Slot – Insert a micro SD card into this slot to store video/image
data.
5. Reset Inset Button – Use an item such as a paperclip to push and hold this
button for 6 seconds and release to reset your camera to its factory
defaults.
Note: Use only the adapter that came with your camera.
TV-IP562WI
2