Table of Contents
Advertisement
TRENDnet User's Guide
Hardware Installation
Cabling
It's recommended that the wiring of the cables in your home or office be done
by an installation professional. If you already have the cable deployed, make
sure the cable and the connectors meet the category 5 Ethernet cable
standards. At least 2 pairs of twisted lines are required for power and data.
Poor cable quality may cause unexpected problems. Testing your cable or
running a new cable is suggested for new camera installation.
Waterproof cap
The TV‐IP323PI itself is IP67 grade water and dust proof. There is a set of
network cable water proof caps that comes with the package as well. Run
your cable going through the accessories, and then crimp the cable with an
RJ45 module. Plug in the network cable and then tighten the waterproof cap
to prevent water running into camera through the cable.
© Copyright 2018 TRENDnet. All Rights Reserved.
Setup Your Camera with Camera Utility
1. Please download the utility at
http://www.trendnet.com/camerautility
2. Extract the downloaded file and double click on the camera utility file
to install
3. Last, click Next to finish the installation.
TV‐IP323PI
6
Advertisement
Table of Contents
