Safety Instructions - Barco R9002372 Owner's Manual

1
Notice on Safety
This equipment is built in accordance with the requirements of the international safety standards IEC 950, EN 60950, UL 1950
and CSA C22.2 No 950 which are the safety standards of information technology equipment including electrical business equipment.
These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order
to protect the user or operator against risk of electric shock and energy
Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stability and strength,
enclosure construction and protection against the risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipment's normal operation
fails.
INSTALLATION INSTRUCTIONS
Before operating this equipment please read this manual thoroughly, and retain it for future reference. Installation
and preliminary adjustments should be performed by qualified BARCO personnel or by authorized BARCO service
dealers.
OWNER' S RECORD
The part number and serial number are located at the back side of the projector. Record these numbers in the spaces provided
below. Refer to them whenever you call upon your BARCO dealer
PART NUMBER :
SER. NUMBER :
DEALER :
Safety indication on the product
FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT)
This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCC
Rules and EN55022.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Note : The use of shielded cables is required to comply within the limits of Part 15 of FCC rules and EN55022
µ All the safety and operating instructions should be read before using this unit.
µ The safety and operating instructions manual should be retained for future reference.
µ All warnings on the equipment and in the documentation manuals should be adhered to.
µ All instructions for operating and use of this equipment must be followed precisely.
R5976381.01 BARCO CINE6 31012002 __________________________________________________________________________
SAFETY INSTRUCTION
TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
hazard, and having access to live parts.
regarding this product.
WARNING

Safety Instructions

1-1