Barco R9002372 Owner's Manual page 23

Start Up of the Adjustment Mode
There are four possible paths to follow in the Adjustment Mode :
GUIDED - Guided should be selected if the user intends to perform a complete alignment of the projected image. All
the necessary geometry and convergence adjustments are made in a predetermined sequence.
RANDOM ACCESS - Random Access should be selected if the user intends to make only a few adjustments.
INSTALLATION - Installation should be selected if the projector has been relocated and/or a different screen size is desired.
When selecting 'Installation', the user will be warned to call a qualified technician to perform the installation
procedure.
SERVICE - Service should be selected if the user wants to delete or modify memory blocks, change password or apply
information. While in Guided or Random Access adjustment mode, the user may use an external source, an
internally generated genlocked pattern or an internally generated multifrequency cross hatch pattern, as a
set-up pattern.
Password :
Some items in the Adjustment mode are password protected. while selecting such an item, the projector asks you to enter your
password. (Password protection is only available when the Password strap on the controller module is in the ON position. Contact
a BARCO authorized technician when no password is requested during the adjustment procedure and password protection is
desired.)
Your password contains 4 digits.
Enter the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a ' x ' appears on the screen under the
ENTER PASSWORD TEXT.
When your password is correct, you get access to the Adjustment Mode.
When the password is incorrect, the message WRONG PASSWORD will be displayed. The projector stays on the previously
selected item.
Factory programmed password : 0000
5-2 _________________________________________________________________________ R5976381.01 BARCO CINE6 31012002
enter
password
xxxx