Franking Labels; Filling The Label Dispenser - Neopost IJ45 Manual

6.

FRANKING LABELS

6.1 Filling the Label Dispenser

The label dispenser is an integral part of the IJ35/45 Franking
Machine and when filled will hold up to 50 labels.
Open the top cover to gain access to the label release lever.
Labels are inserted in the dispenser with the tab uppermost and the
label side to be franked facing the direction of travel.
Tab
Printing Surface
Hold the label release lever fully to the left to allow the labels to
engage with the feed mechanism, then release the lever.
DO NOT force too many labels into the Dispenser or push labels in
without operating the release lever.
Close the top cover.
Neopost Approved Labels are supplied in boxes of 1000.
Please refer to "Contacting Neopost" for information on ordering
Neopost approved supplies.
Franking labels 31