Region Exiting Detection - HIKVISION DS-96000NI-I16 Series: DS-96000NI-I16/H Series User Manual

9) Click Draw Region and draw a quadrilateral in the preview window by specifying four
vertexes of the detection region.
Step 7 Configure Arming Schedule and Linkage Action.
Step 8 Click Apply.

12.6 Region Exiting Detection

Purpose:
Region exiting detection function detects objects that exit from a pre-defined virtual region.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Region Exiting.
Step 3 Select a Camera to configure.
Step 4 Check Enable Region Exiting Detection.
Step 5 Optionally, check Save VCA Picture to save the captured pictures of region exiting detection.
Step 6 Follow the steps to set the detection rules and detection areas.
10)
Select an Arming Region to configure. Up to 4 regions are selectable.
11) Drag the sliders to set Sensitivity.
Sensitivity: The higher the value is, the more easily the detection alarm can be triggered.
Its range is [0-100].
Network Video Recorder User Manual
Figure 12-7 Region Exiting Detection
123