Chapter 12 Vca Event Alarm; Face Detection - HIKVISION DS-96000NI-I16 Series: DS-96000NI-I16/H Series User Manual

Chapter 12 VCA Event Alarm

The device supports receiving the VCA detections sent by connected IP cameras. Enable and
configure the VCA detection on the IP camera settings interface first.
 VCA detections must be supported by the connected IP camera.
 Refer to the User Manual of Network Camera for the detailed instructions for the VCA
detection.

12.1 Face Detection

Purpose:
Face detection function detects the face appears in the surveillance scene. Linkage actions will be
triggered when a human face is detected.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Face Detection.
Step 3 Select a Camera to configure.
Network Video Recorder User Manual
Figure 12-1 Face Detection
116