11.6 Configure Sensor Alarms
Purpose:
Set the handling action of an external sensor alarm.
11.6.1 Configure Alarm Input
Step 1 Go to System> Event>Normal Event>Alarm Input
Step 2 Select an alarm input item from the list and click
Step 1 Select the alarm input type to N.C or N.O.
Step 2 Edit the alarm name.
Step 3 Check the radio button of Input.
Step 4 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 5 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 6 Click Apply and follow the message box to reboot device to take effect the settings.
Network Video Recorder User Manual
Figure 11-6 Alarm Input
107
.