Bad Sector Detection - HIKVISION DS-96000NI-I16 Series: DS-96000NI-I16/H Series User Manual

If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the
checkbox of the Continue to use the disk when self-evaluation is failed item.

16.1.3 Bad Sector Detection

Step 1 Go to Maintenance > HDD Operation > Bad Sector Detection.
Step 2 Select the HDD No. in the dropdown list you want to configure.
Step 3 Select All Detection or Key Area Detection as the detection type.
Step 4 Click the Self-Test button to start the detection.
Network Video Recorder User Manual
Figure 16-3 S.M.A.R.T Settings Interface
146