Region Exiting Detection - HIKVISION DS-7100HGHI-E1 User Manual

Sensitivity: Range [0-100]. The higher the value is, the more easily the detection alarm can
be triggered.
Step 7 Click and draw a quadrilateral in the preview window by specifying four vertexes of
the detection region, and right click to complete drawing. Only one region can be
configured.
You can use the
Up to 4 rules can be configured.
Step 8 Click Apply to save the settings.

10.6 Region Exiting Detection

Purpose
Region exiting detection function detects people, vehicle or other objects which exit from a
pre-defined virtual region, and some certain actions can be taken when the alarm is triggered.
 Please refer to the Chapter 10.5 Region Entrance Detection for operating steps to configure
the region exiting detection.
 Up to 4 rules can be configured.
Digital Video Recorder User Manual
to clear the existing virtual line and re-draw it.
Figure 10-10 Set Region Entrance Detection
183