Configure Pppoe; Configure Ntp - HIKVISION DS-96000NI-I16 Series: DS-96000NI-I16/H Series User Manual

14.4 Configure PPPoE

If the device is connected to Internet through PPPoE, you need to configure user name and
password accordingly under System > Network > TCP/IP > PPPoE.
Contact your Internet service provider for details about PPPoE service.

14.5 Configure NTP

Purpose
Connection to a network time protocol (NTP) server can be configured on your device to ensure
the accuracy of system date and time.
Step 1 Go to System > Network > TCP/IP > NTP.
Step 2 Check Enable.
Step 3 Configure NTP settings as need.
 Interval (min): Time interval between two time synchronization with NTP server.
 NTP Server: IP address of the NTP server.
 NTP Port: Port of the NTP server.
Step 4 Click Apply.
Network Video Recorder User Manual
Figure 14-4 NTP Settings
136