netvox R718J2 User Manual page 6

Data report configuration and sending period are as following:
Min. Interval
(Unit:second)
Any number between
1~65535
Report Configuration
ConfigReportReq
ConfigReportRsp
R718J2
ReadConfigReportReq
ReadConfigReportRsp
(1) Configure R718PJ2 device parameter MinTime = 1min、MaxTime = 1min、BatteryChange = 0.1v
Downlink: 0143003C003C0100000000
Device Return:
8143000000000000000000 (configuration success)
8143010000000000000000 (configuration failure)
(2) Read R718J2 device parameter
Downlink: 0243000000000000000000
Device Return:
8243003C003C0100000000 (device current parameter)
Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V
MaxTime
S
leeping(MinTime)
Wakes up and collects data
REPORTS 3.6V
Note:
MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BtteryVoltageChange value.
Max. Interval
(Unit:second)
Any number between
1~65535
0x01 MinTime
(2bytes Unit: s)
0x81 Status
0x43 (0x00_success)
0x02
MinTime
0x82
(2bytes Unit: s)
Wakes up and collects data
REPORTS 3.5V
Current
Reportable Change
Reportable Change
Report
Can not be 0.
per Min. Interval
MaxTime
(2bytes Unit: s)
Reserved (9Bytes, Fixed 0x00)
MaxTime
(2bytes Unit: s)
MaxTime
S
leeping(MinTime)
5
Current
Change≥
Reportable Change
Report
per Max. Interval
BatteryChange
(1byte Unit:0.1v) (4Bytes, Fixed 0x00)
Reserved (8Bytes, Fixed 0x00)
BatteryChange
(1byte Unit:0.1v) (4Bytes, Fixed 0x00)
＜
Change
Reserved
Reserved