Table of Contents
Advertisement
BEFORE USE
Read the safety information and instruction manual carefully. Be sure you understand the safe-
ty measures, instruction manual and warning labels. Use common sense when operating the
machine and use appropriate personal protective equipment.
Always check the performance and the machine combination that are used. It's highly impor-
tant these matches in a satisfactory manner. This is to ensure the product or the function and
most important yours and others safety. Do visual inspection of equipment or product before
use. Fix or replace damaged or worn parts immediately to reduce the risk of injury. Lubricate
moving parts and check that all screw-nuts and bolts are tightened.
Learn and remember the correct working methods. Beginners should always keep a low speed,
use extreme caution before routine and product knowledge is achieved. The user/customer is
responsible to handle the situation correctly. The product should not be taken into use unless
it can be done in a safe way for the user.
Read the tractor's manual before connecting machine.
WORKSTATION: The driver must remain in the driver's seat during the the entire operation.
If the operator need to leave the tractor, the PTO must be disengaged, the tractor engine shut
off and the parking handbrake must be applied.
NEVER RUN THE HYDRAULICS WHEN THE TRACTOR IS TURNED OFF
Warning!
USE
Only people who understand the safety information and instructions in this manual may op-
erate the equipment. Be alert and careful when working with the machine and only use the
equipment or product in the manner described in this manual. When working with equipment
that has moving parts, there is always the risk of injury. Be careful when working with equip-
ment equipped with hydraulic hoses ,oil under pressure can penetrate the skin. Seek medical
attention immediately if this occurs. Always work alone with the equipments that are defined
as single purpose equipments. Never overload the implement. Respect the equipment's dan-
ger zone.
8
8
For safety, this product should only be used in the manner described in this man-
ual. The user is responsible for the instruction to be read through and followed.
Make sure all parts have stopped rotating before taking any meassures on the machine
Danger!
When the power take-off is disconnected, the power transmission shaft stops rotating.
However, this does not mean that all mower parts stops rotating directly.
Be careful and wait a few minutes to make sure all parts standstill.
←Table of contents
Warning!
Advertisement
Table of Contents
