Table of Contents
Advertisement
INSTRUCTION FOR EMERGENCIES
In case of an emergency please dial 112.
Keep cell phone or emergency phone available specially when working alone. First aid kit and
fire extinguishers must be kept easily accesable during all work, maintenance and service.
SURROUNDINGS
Check and make sure that the area is clear of people, children and objects before switching
on or using the equipment. Risk of serious personal injury. Be especially careful if children are
in the area where the equipment is being use or stored. Check that there are no low-hanging
power lines within the work area. Be careful when working on slopes and near ditches.
Always work alone with equipment designed for single - purpose tools/products. Never have
junk/debris lying in your work area. Have workspaces clean. Always respect the risk zone.
DO NOT allow anyone to ride on the blade!
Danger
BEFORE USE
Read the safety information and operating instructions carefully. Be sure that you understand
the safety information, operating instructions and warning labels. Use common sense when
vusing the machine and use appropriate personal protective equipment Always check the
performanceand the machine combination that are use.It's highly important these matches in
a satisfactory manner.This is to ensure the product or the function and most important yours
and others safety.
Visually inspect the equipment or product before using it.Fix or replace damaged and worn
parts immediately to reduce the risk of injury. Lubricate moving parts and check that all screw-
nuts and bolts are tightened. Clearing when necessary.
Learn and remember the correct working method. Beginners should always keep a low speed,
use extreme caution before routine and product knowledge is achieved. The user/customer is
responsible to handle the situation correctly. The product should not be taken into use unless
it can be done in a safe way for the user.
•
Ensure that all nuts, bolts and fittings are securely attached, that all packing / shipping
supplies such as tape, steel tape, rope, etc. are removed.
•
Check that the reinforcing bars are not broken, replace if necessary.
•
Lubricate the tower rim thoroughly with grease before the blade mounted.
•
Turn and check that everything is clear before the cylinder is mounted.
Warn
4
!
Children must not be left unsupervised in the area.
Compliance with the safety instructions requires that the product is only used
ing!
as described in these instructions. It is the user's responsibility to read through
the instructions and comply with them.
Advertisement
Table of Contents
