Notation And Pictograms - Metrohm 762 IC Interface Instructions For Use Manual

1.3.2

Notation and pictograms

762 IC Interface
The following notations and pictograms (symbols) are used in these In-
structions for Use:
Range
SYSTEM STATE
<OK>
[ RUN/STOP ]
15 15
1.3 Information on the Instructions for Use
Menu item, parameter or entry
value
in «IC Net» program
Program window
in «IC Net» program
Button
in «IC Net» program
Switch or key
Part or control of 762
Hazard
This symbol draws attention to a
possible danger to life or of injury if
the associated directions are not
followed correctly.
Warning
This symbol draws attention to
possible damage to instruments or
instrument parts if the associated
directions are not followed cor-
rectly.
Caution
This symbol marks important infor-
mation. First read the associated
directions before you continue.
Comment
This symbol marks additional in-
formation and tips.
7