Operation; Manual Operation - Metrohm 762 IC Interface Instructions For Use Manual

3

Operation

3.1

Manual operation

RUN/
STOP
762 IC Interface
Switch instrument on/off
The 762 IC Interface 762 is switched on and off using mains
switch 1 1 on the front of the instrument (see Fig. 2 and Fig. 4).
After the instrument has been switched on the mains pilot lamp 2 2
lights up to show that the instrument is ready for use.
Start/stop determination
Determination on System 1 or System 2 can be started or
stopped manually using the key 3 3 or key 5 5 .
RUN: Manual start of a determination (
STOP: Manual stop of a determination or data acquisition (
determination
This function is only available if the
Run/Stop button means 'stop' when measuring
abled in the
762 IC Interface
The status display 4 4 or 6 6 within the RUN/STOP key 3 3 or 5 5 have
the following meaning:
LED dark: No system loaded
LED lit up: Instrument ready (waiting for external start)
LED flashes: Determination running
Start determination
or
Stop data acquisition
window.
3.1 Manual operation
).
Stop
).
Second press of
option is en-
21