8 Appendix
8.1 Regulatory Status
8.1.1 CE Marking
®
The LEVIFLOW
flowmeters with single-use flow sensor, in its various configurations, is in conformity with the
below mentioned European Directives. The flowmeter system is thought to be used in hydraulic circuits of
production equipment of Bioprocessing and Pharmaceutical industry.
Part Name
Description
Flowsensors:
LFS-xxSU
LFC-1C-PC
Single-Channel Converter: 24V DC supply input
LFC-6CIO-PC
6-Channel Converter: 24V DC supply input
EMC Directive 2014/30/EC:
The following standards of the EMC directive are tested and confirmed at a certified laboratory:
EN61000-6-2
Generic standards, Immunity for industrial environments
EN61000-6-4
Generic standards, Emission standard for industrial environments
Machinery Directive 2006/42/EC:
The machinery directive essentially has been followed by a risk analysis, according mitigation actions and a
user manual for safe operation. For the design and testing the following standards are used as a guideline:
EN ISO 15494
Plastic piping system for industrial applications
Safety for machinery – principles for risk assessments: used for system risk analysis.
ISO12100
Pressure Equipment Directive 97/23/EC:
The pressure equipment directive is used as guide line according to Category I Modul A (internal quality
control). For maximum pressure validation the following standard is followed:
EN ISO 15494
8.1.2 Disposal of Equipment – WEEE Directive 2012/19/EU
Follow local legislation for disposal of equipment. In the European Union (EU) marked ( ) devices are governed by the
European WEEE Directive 2012/19/EU. Do not dispose with normal waste.
PL-4509-00, Rev09, DCO# 21-230
LFS-03SU (0 – 0.8 lpm, rated for 5 bar)
LFS-06SU (0 - 8 lpm, rated for 5 bar)
LFS-10SU (0 - 20 lpm, rated for 5 bar)
LFS-15SU (0 - 50 lpm, rated for 5 bar)
LFS-20SU (0 - 80 lpm, rated for 5 bar)
Plastic piping system for industrial applications
User Manual for LEVIFLOW
®
LFS-SU Flowmeters
www.levitronix.com
28
Need help?
Do you have a question about the LEVIFLOW LFS-SU and is the answer not in the manual?