Saluki SPS8 Series User Manual page 39

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
Command [:]LIST:WIDTh <count>,<time>
1. This command is used to set the delay time of the appointed step in the list.
Parameters: count is the appointed step number; time is the setup delay time.
Unit: mS
Return command: none
Example:
If sending command [:]LIST:WIDT 1,2000, it means to set the delay time of the first step of the list file as
2000mS.
2. Related command [:]LIST:WIDTh? <count>, it means to query the delay time of the appointed step in
the current list.
Return parameters: <time>
--- END OF DOCUMENT ---
39