Front-Panel Operation Overview; Constant Voltage Operation - Saluki SPS8 Series User Manual

Esc Esc key (can be exited from any working condition)
Function Keys Description
Set the voltage value
V-set
Set the current value
I-set
Save the current settings to a specified storage location
Save
Recall the saved settings from a specified storage location
Recall
Menu operation: set the parameter of the power supply
Menu
Control the output on/off state
Used together with the multifunction keys to perform diversity functions and applications(for
example: shift+Menu can perform menu function）
Up-key: choose menu item in menu operation or to increase the output voltage
▲
▼ Down-key: choose menu item in menu operation or to reduce the output voltage
Enter the selected value or setting
Enter

4.2 Front-panel Operation Overview

The following section describes an overview of the front-panel keys before operating your power supply.
The power supply is shipped from the factory configured in the front-panel operation mode. At power-on,

the power supply is automatically set to operate in the front-panel operation mode. When in this mode, the
front panel keys can be used.
When the power supply is in remote operation mode, you cannot use the front-panel. A change between

front-panel and remote operation modes will not result in any change in the output parameters. You can
change the front-panel and remote operation modes by PC.
The output of the power supply can be enabled or disabled from the front panel by pressing the key

.
The VFD display shows the current operating status of the power supply with annunciators. When it is

powered on, the VFD will display two lines of data. The first line shows the actual voltage value, actual
current value and power supply's status while the second line shows the voltage value that can be
measured by voltmeter and output setting value of the power supply.

4.3 Constant Voltage Operation

The constant voltage range is from 0V to the maximum voltage value of each model. It is very easy for you to
set the constant voltage output. You have 2 solutions to set the constant voltage value.
Solution 1:
Press the ▲ and ▼ keys to change the value when the SPS8 series power supply is powered on.
Solution 2:
Step1. Power on the SPS8 series instrument
Tel: 886.909 602 109 Email: sales@salukitec.com
17
www.salukitec.com