Saluki SPS8 Series User Manual page 23

2) When VFD display screen shows the item Menu Config, press the key ▼ twice to select the item List Set,
press the key
3) When VFD display screen shows the item Load ListFile, Press the key ▼ twice, select the item Edit File
Format, press the key
4) When VFD display screen shows 8*25 Steps, Press the key ▼, select a list mode you want from 1*200
Steps,2*100 Steps, 4*50 Steps, press the key
1*200 steps means to set list file as 1X200 step
2*100 steps means to set list file as 2X100 step
4X50 steps means to set list file as 4X50 step
8X25 steps means to set list file as 8X25 step
5) Press ▼ to select the item Edit List File, press the key
6) When VFD display screen show the item Edit List File 1, press the key ▲ and ▼ to select sequential
number you want to edit, press the key
7) When VFD display screen show the item List x Steps= xxx, press numberic keys to set the total list steps.
Press the key
8) When VFD display screen show the item List File x Loop Mode, press the key ▲ and ▼ to select
operation mode:
Continuous means to start from the first step to the last step, stop the exsiting executing until next trigger
Loop Mode means to looping execute list file
Step Mode means excute one stpe after the trigger
9) When VFD display screen show the item Step 1 Time= xxxxx mS, press numberic keys to set time for step
1, press the key
10) When VFD display screen show the item Step 1 Volt= xxxxx V, press numberic keys to set voltage for step
1, press the key
11) When VFD display screen show the item Step 1 Curr= xxxxx A, press numberic keys to set current for
step 1, press the key
12) Repeat step 9, 10, 11 to complete all steps in list file
13) Repeat step 5 to 15 to edit other list files if needed
14) Press ▼ to select Load ListFile, press the key
15) Press the key ▲ and ▼ to select sequential number you want to load, press the key
The instrument is in the List mode. The VFD display screen shows OFF in the right when output is on.
VFD display screen shows List1 in the right when output is off. Press the key On/Off to execute. Press key
Shift+2 or Esc to exit. Press key Shift+2 direct to excute the last list file.
16) Under loop mode, the instrument looping executes automatically. Please find the following table at
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
Tel: 886.909 602 109 Email: sales@salukitec.com
to confirm.
to confirm.
to confirm.
to confirm.
23
www.salukitec.com
to confirm.