Table of Contents
Advertisement
Exit: exit from the current menu
When accessing to the List Set item, the following menu items will be displayed on the VFD display screen by
pressing the keys ▲ and ▼.
Load List File: read list file
Edit List File: edit list file
Continuous
Loop Mode
Step Mode
Edit File Format: format file in list operation
1X200 Steps
2X100 Steps
4X50 Steps
8X25 Steps
Exit: exit from the current menu
When accessing to the Auto Test item, the following menu items will be displayed on the VFD display screen
by pressing the keys ▲ and ▼.
Load Atest File: read auto test file
Edit Atest File: edit auto test file
Exit: exit the auto test menu
When accessing to the Output Timer item, you can see the item Close Delay, which means to set the output
timing.
Close Delay:set the duration of the output
The unit of the Close Delay is second, the accuracy is 0.001 second;The output switch to OFF
state when the duration is over.
The function is disable when the duration is set 0 second. The disable state is the defualt state.
The function is invaild when the TRI KeepOut is used in ordinary working modes.
When accessing to the SN item, the 18 digits serial number shows on the VFD display.
For example: SN= 080010960121229001
Continuous mode, start from the first step to the
last step.
Loop mode, repeatedly execute the steps in
accordance with the order of the list.
Step mode, execute single step for one trigger.
Set list file as 1X200 step
Set list file as 2X100 step
Set list file as 4X50 step
Set list file as 8X25 step
21
Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
