Saluki SPS8 Series User Manual page 20

Remote Sense: set the remote sense mode
On
Off(Default)
Curr Unit: set the unit of current
mA
A(Default)
Match Power: set the matching power
50 HZ(Default)
60 HZ
Baudrate Set: set the baud rate
4800
9600(Default)
19200
38400
Comm. Parity: set the communication parity
Key Lock Set: set the key lock and password function
Exit: exit from the current menu
When accessing to System Set item,the following menu items will be displayed on the VFD display screen by
pressing the keys ▲ and ▼.
Max Volt: set the maximum voltage of the power supply
Max Volt=
Step Volt: set the step voltage
Activating the remote sense mode ( Rear-panel
measurement mode)
Activating the front-panel measurement mode
Set the unit of current is mA
Set the unit of current is A
Match 50HZ
Match 60HZ
Setting the baudrate as 4800bps
Setting the baudrate as 9600bps
Setting the baudrate as 19200bps
Setting the baudrate as 38400bps
None(Default) Setting no parity bit
Setting comm. parity as even parity bit
Even
Setting comm. parity as odd parity bit
Odd
When set the password as 0 or pressing the key
Enter directly, the Key Lock Set is disable.
When the Key Lock Set is enable, the Key Lock
Password=
Set get locked if no keyboard operation within 60
seconds, the Key Lock Set gets enable only if
you input the correct password.
Setting the maximum voltage
After the step voltage set, the voltage value
Step= increases or discreases equal to each step voltage
Tel: 886.909 602 109 Email: sales@salukitec.com
by pressing the key ▲ or ▼ once.
20
www.salukitec.com