Saluki SPS8 Series User Manual page 19

Config: set the function of power supply
System set: set the system parameter
List Set: set list operation
Auto test: set auto test operation
Output Timer: set the duation of output
SN: the serial number of the power supply
Exit: exit the first-level menu
When accessing to Config item, the following menu items will be displayed on the VFD display screen by
pressing the keys ▲ and ▼.
Init: set all settings to factory default set
Out Memory: set the power supply's output state when it is powered on
On
Off(Default)
TRI KeepOut: set TRI as preseved output port
On
Off(Default)
Fast Recall: set key shortcut function
On
Off(Default)
Key Sound: set the key sound
On(Default)
Off
Knob Lock: set the knob lock state
On
Off(Default)
Setting the same state as last time you turned off the
power supply.
Setting the output to OFF state when the power
supply is powered on.
When TRI is in low voltage level, the output state of
power supply is ON.
When TRI is in high voltage level, the output state
of power supply is OFF.
When the TRI KeepOut is enabled, the ON/OFF on
the front panel is invalid.
The TRI Keepout is only valid to ordinary operation
mode. It is invaid to list opeartion and auto test
mode.
Disabled
In the main interface (not enter any menu of the
power supply), press the key 0~9 to recall
the parameters set by Save function
Disabled
The buzzer will sound when any key was pressed.
The buzzer will not sound when any key was
pressed
The knob is locked and rotating the knob will not
cause any change of the setting value.
The knob is unlocked and rotating the knob will
cause change of the setting value.
19
Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com