Table of Contents
Advertisement
11/08 Rev. 5.01-01
Print Roller
Cleaning the Print Roller
Contamination on the print roller can de-
grade the quality of the print and the trans-
port of the material.
1. Switch off the printer and disconnect from
the power
2. Remove material and foil from the printer.
You can access the print roller more ea-
sily if you remove the tear-off edge (1) be-
forehand.
3. To do this, unfasten the screw (2) in the
middle of the tear-off edge (Fig. 2). You
need a size 10 Torx screwdriver for this.
Now remove the tear-off edge.
4. Moisten a lint-free cloth with roller cleaner
and wipe the printer roller (Fig. 3). Gra-
dually rotate the roller until it is completely
clean.
5. Refit the tear-off edge.
Changing the Print Roller
Tools
Size 10 Torx screwdriver (comes with the
printer).
Disassembly:
1. Switch off the printer and disconnect from
the power.
2. Remove material and foil from the printer.
3. Unfasten the screw (1) in the middle of the
tear-off edge (Fig. 1).
4. Remove the tear-off edge.
5. Release the set screw (2).
6. Remove the print roller sideways (Fig. 3).
Fitting:
1. Push the print roller through the external
bearing plate (3).
The printer roller axle is flattened on the
end.
USER MANUAL
AP 4.4 – AP 5.4
1
2
3
Maintenance & Cleaning
8
Advertisement
Table of Contents
