03/13 Rev. 5.08-01
Servicing and cleaning
Intervals
USER MANUAL
64-xx – 64-xx Dispenser
Notes for cleaning
Regular servicing and cleaning work is necessary for safe operation and
high running performance. The servicing intervals are dependent on the
operation and ambient conditions, daily operating times and the print
medium.
Regularly clean the print head and feed roller of paper, adhesive and ink
residues.
Cleaning agents
Part to be cleaned
Printhead
Rubber rollers (e.g. print
roller, feed roller, brake
roller)
Deflection axles or tubes
made of metal
Outer surfaces
Tab. 1
Recommended cleaning agents.
CAUTION! - Do not use any cleaning agents which could damage or
destroy the coating surfaces, labelling, display, type plates, electrical
components etc.
CAUTION! - Under no circumstances should you use scouring or synthetic
solvent cleaning agents. Avoid acidic and alkaline solutions.
Cleaning agent
Printhead cleaning pen
Cleaning paper
Ethyl or Isopropyl alcohol
Cleaning agent for rubber
rollers
Methylated spirit
Label remover
Comercially available
neutral cleaning agents
Servicing and Maintenance
Ordering no.
95327
5030
98925
A103198
4