Cleaning/Exchanging The Dust Filter Liner; Important Notes; Exchanging The Filter Liner - Novexx Solutions 64 Series User Manual

03/13 Rev. 5.08-01

Cleaning/exchanging the dust filter liner


 Installation instruction see service manual, topic section „Service

•
•

1. Turn the screw (B) at the filter holder ¼ rotation.
2. Remove the filter holder. Take the filter liner (A) out of the filter holder.
3. Insert a new filter liner (article no. A2581).
4. Press the filter holder against the rear side and turn the screw (B) ¼
USER MANUAL
64-xx – 64-xx Dispenser

Important notes

The dust filter is an option (article number A9344). The filter is mounted in
front of the fan opening at the printer rear side.
Installation must be done by a qualified service technician.
Mechanics", chapter „Assembling accessories", "Dustfilter".
CAUTION!
An exhausted filter liner can cause the power supply to overheat and the
device to break down.
 Replace the filter liner regularly, at least in monthly intervals.
The replacement interval of the filter liner has to be defined individually
according to...
dust occurence
operating times
The filter liner can be cleaned by blowing it out with compressed air or by
washing it out.

Exchanging the filter liner

Fig. 7 64-08 with mounted dust filter (A).
Alternativ: Clean the filter liner by blowing it out with comressed air or wash
it out and dry it and insert it afterwards.
rotation.
Servicing and Maintenance
A
B
14