Cleaning The Cutter - Novexx Solutions 64 Series User Manual

03/13 Rev. 5.08-01

Cleaning the cutter



1. Switch off the device and pull out the mains plug.
2. Remove material and ribbon.
3. Remove glue residue from the top and bottom cutters. It may be necessary
USER MANUAL
64-xx – 64-xx Dispenser
Only with cutter option!
WARNING!
Sharp blades may cause cut injuries at hands and fingers!
 Take the utmost caution when cleaning the cutters!
 Do not touch the cutters with bare hands!
When self-adhesive material is being used, removal of glue residue is
necessary at regular intervals to ensure that material continues to be cut
and transported correctly. Paper scraps and adhesive can cause
malfunctions.
CAUTION! - Use non-fluff cloths and cleaning fuel for cleaning. Never work
on the cutter blades with hard metal objects! Even the slightest, non-visible
damage to the blade can considerably reduce the cutting ability of the
blade.
to slightly swivel the cutter on order to access the entire cutting edge.
Servicing and Maintenance
13